Panasonic UF-890/990 appendix Basic Transmission Settings, Halftone, Verification Stamp

Basic Transmission Settings

Halftone

The Halftone setting is useful when sending photographs or illustrations with gray tones. Your machine is preset to HALFTONE = Off. You can select either Fast or Quality mode.

Press HALFTONE to:

	FAST		FAST		FAST
	QUALITY		QUALITY		QUALITY
	HALFTONE	HALFTONE		HALFTONE
HALFTONE = Off		HALFTONE = Quality		HALFTONE = Fast

Verification Stamp

The Verification Stamp helps you to confirm successful transmissions by stamping the bottom of each

successfully transmitted page with a small mark.

Press STAMP to:

STAMPSTAMP

STAMP = Off STAMP = On

NOTE	1. When you select HALFTONE, FAST or QUALITY, your machine will automatically select Fine
	Resolution.

2.When you store a document in memory, the Verification Stamp will stamp on the document if it is successfully stored in memory. In this case the Verification Stamp is not a confirmation that the document was successfully transmitted. If you wish to disable the use of the Verification Stamp when storing document in memory, change the setting of Fax Parameter No. 28. (See page 37)

3.To change the preset Verification Stamp position, change the setting of Fax Parameter No. 04. (See page 36)

Basic Operations

43