Sending Documents
51
Memory Transmission
Basic Operations

Multi-Station Transmission (Broadcasting)

If you have to send the same document(s) to multiple stations, you can save tim e in feeding the
document(s) by using memory transmission. That is, you can store the do cument(s) into memory and then
send it to the station(s) automatically.
NOTE 1. You can review the stations you entered in step 3 before storing your document into memory
by pressing or . Press to clear an entered station or group shown on the
display if needed.
2. The “Quick Memory Transmission” is disabled if multiple stations are set.
1
Set document(s) face down.
ENTER STATION(S)
THEN PRESS START 00%
2
Make sure that the MEMORY lamp is on.
If not, press “On”. to set “On”.
3Dial by any combination of the following methods:
•One-Touch Dialing
•Abbrev iated Dialing
•Manual Nu mber Dialing, press after each
station is entered
(UF-990: Up to 70 stations, UF-890: Up to 32 stations)
•Directo ry Search Dialing, press after each
station is entered
(For details, see page 47 to 50.)
Ex:
If you want to confirm the number of stations you have
entered, press .
<01>(Station name)
5551234
[010](Station name)
5553456
2 STN(S) ARE SET
ADD MORE OR START
4
The document is stored into memory with a file number.
Then starts dialing the telephone numbers in sequence.
* STORE * NO.001
PAGES=001 01%
* STORE * COMPLETED
TOTAL PAGE=005 25%
* DIALING * NO.001
(Station name)
MEMORY
MEMORY
SET
SET
01
ABBR
010
SET
START
CLEAR