Panasonic UF-890/990 appendix On the next

Customizing Your Machine

Fax Parameter Table

No.	Parameter	Setting	Setting			Comments
		Number
24	PRINT REDUCTION	1	Fixed		Selecting print reduction mode.
					Fixed : Reduce received document according to setting
					of Parameter No. 25.
		*2	Auto
					Auto : Reduce received document according to the
					length of received documents.
25	REDUCTION RATIO	70	70%		Selecting fixed print reduction ratio from 70% to 100%.
					This parameter functions only when fixed print reduction is
		----	----
					selected on Fax Parameter No. 24.
		100	100%
26	POLLING PASSWORD		(----)		Setting a 4-digit password for secured polling. (See page
				69)
27	POLLED FILE SAVE	*1	Invalid		Selecting whether the machine retains the polled
					document in memory even after the document is polled
		2	Valid
					once.
28	STAMP AT MEM. XMT	1	Invalid		Selecting whether the machine stamps the original
					documents when storing the documents into memory.
		*2	Valid
					(Depending on the Stamp setting on the Control Panel)
31	INCOMPLETE FILE	*1	Invalid		Selecting whether the machine retains the document in
	SAVE				memory if the document is not successfully transmitted.
		2	Valid
32	COPY REDUCTION	1	Manual		Selecting whether the machine performs the copy
					reduction ratio automatically or manually.
					Manual : The machine will prompt you for the Zoom ratio
					(100% to 70%) when making copies.
		*2	Auto
					Auto : The machine will automatically determine the
					reduction ratio according to the length of the
					original document.
33	XMT REDUCTION	1	Invalid		Selecting whether the machine performs reduction when
					the transmitting document is wider than the recording
		*2	Valid
					paper used at the receiving machine.
34	ENERGY SAVER	1	Off		To reduce the power consumption in standby, select either
	MODE				Energy-Saver or Sleep mode and specify the Delay Time
					(1 to 120 minutes) for the machine to enter into the
					selected mode.
					The Delay Timer setting is only available in the Energy-
					Saver or Sleep Modes.
		2	Energy-
					Off	: The unit will remain in	standby
			Saver
						mode and consume more energy
						than when in Energy-Saver or
						Sleep modes.
					Energy-Saver Mode : Saves energy by consuming less
		*3	Sleep
						power than when in standby mode
						by turning off the fuser unit after the
					Sleep Mode	specified time.
						: This is the lowest power state that
						the machine enters after the
						specified time without	actually
						turning off.

Continued on the next page...

Programming Your Machine

37