Panasonic UF-890/990 appendix Control Panel, Used to start Abbreviated Dialing. See page 49

Control Panel

Getting to Know Your Machine

CONTRAST

RESOLUTION

HALFTONE

Used to set Normal, Lighter, or Darker. (See page 42)

Used to set Standard, Fine, Super-Fine. (See page 42)

Provides OFF, QUALITY or FAST settings for halftone documents. (See page 43)

+

VOLUME

-

Used for the following:

•Adjust the monitor and ringer volume. (See page 25)

•Move the cursor while entering numbers and characters.

•Search the station name for Directory Search Dialing.

•Confirm the entered station for multi-station communication.

•Select functions.

•Confirm the current communication modes (e.g. Page number, ID, Dialed Telephone number, File number) when the unit is ON LINE.

MEMORY

PAUSE

REDIAL

ABBR

SUB-ADDR

FLASH

FUNCTION

Used to select either memory or direct communication.

(See page 45 to 51)

Used to enter a pause when recording or dialing a telephone number, or to redial the last dialed number. (See page 60)

Used to start Abbreviated Dialing. (See page 49 and 53)

Used to separate the Sub-address from the telephone number when dialing, or to access some features of your PBX.

Used to start or select the function and sub-functions.

These functions are explained in detail on page 12.

STAMP

DIRECTORY

SEARCH

CLEAR

SET

LINE

SELECT

MONITOR

Used to turn the verification stamp ON or OFF. (See page 43)

Used to search for a station name. (See page 50 and 54)

Used to erase the previously entered input.

Used to set operations.

Used to select the communication port. Available for UF-990 only if the Optional G3 Communication Port Kit has been installed. (See page 156)

Used to start On-Hook Dialing. (See page 56)

ABCDEF

1 2 3

GHIJKLMNO

4 5 6

PRSTUVWXY

7 8 9

TONEOPER

0

TONE

Used for manual number dialing, recording phone numbers, and numerical entries.

Used to temporarily change the Dialing Mode to Tone when Pulse mode is set.

STOP

COPY

START

Used to cancel operations. When it is pressed, the machine will return to standby.

Used to make copies. (See page 65)

Used to start operations.

15