Mazda Mazda2_8BL3-EA-10E_Edition3 Turnand Lane-Change Signals, Fog Lights

Black plate (160,1)
Turnand Lane-Change
Signals
TurnSignals
Move the signal lever down (for a left
turn) or up (for a right turn) to the stop
position. The signal will self-cancel after
the turn is completed.
If the indicator light continues to flash
after a turn, manually return the lever to
its original position.
Right turn
Left turn
Right lane change
Left lane change
OFF
Green indicators on the dashboard show
which signal is working.
Lane-change signals
Move the lever slightly toward the
direction of the change ―until the
indicator flashes―and hold it there. It
will return to the off position when
released.
NOTE
Ifan indicator light stays on without flashing
orif it flashes abnormally, one of the turn
signalbulbs may be burned out.
Fog Lights
í
Use this switch to turn on the fog lights.
They help you to see as well as to be seen.
Toturn the fog lights on, rotate the fog
light switch to the position.
The headlight switch must be in the
position before turning on the fog lights.
Fog light switch
Toturn them off, rotate the fog light
switch to the OFF position or turn the
headlight switch to the or OFF
position.
NOTE
lThefog lights will turn off when the
headlightsare set at high beam.
l(Withauto-light control)
Ifthe fog light switch is in the ON position
andthe headlight switch is in the AUTO
position,the fog lights will be turned on
whenthe headlights, the exterior lights and
dashboardillumination are automatically
turnedon.
5-54
DrivingYour Mazda
í
Somemodels.
Switches and Controls
Mazda2_8BL3-EA-10E_Edition3Page160
Wednesday,September 29 2010 3:52 PM
Form No.8BL3-EA-10E