Mazda Mazda2_8BL3-EA-10E_Edition3 QCheck Fuel Cap Warning Light, QSeat Belt Warning Light/Beep

Driving Your Mazda

Warning/Indicator Lights and Beep Sounds

qCheck Fuel Cap Warning Light

This warning light illuminates for a few seconds when the ignition is switched ON.

If the check fuel cap warning light illuminates while driving, the fuel-filler cap may not be installed properly. Stop the engine and reinstall the fuel-filler cap. Refer to the fuel-filler cap on page 3-19.

qSeat Belt Warning Light/Beep

The seat belt warning light illuminates and a beep sound will be heard if the driver's seat belt is not fastened when the ignition is switched ON.

Conditions of operation

Condition	Result
The driver's seat belt is not	The warning light
	flashes and a beep
fastened when the ignition is
switched ON.	sound will be heard
	for about 6 seconds.
The driver's seat belt is	The warning light
fastened while the warning
	turns off and the beep
light and the beep sound are
activated.	sound stops.
The driver's seat belt is	The warning light will
	not illuminate and the
fastened before the ignition
is switched ON.	beep sound will not be
	heard.

Belt minder

NOTE

Consult an Authorized Mazda Dealer to deactivate or restore the belt minder. Though the belt minder can be deactivated, doing so will defeat the purpose of the system to warn the driver and the front passenger in the event that their seat belts are not fastened. For the safety of the driver and front passenger, Mazda recommends not deactivating the belt minder.

Driver's seat

If the driver's seat belt is not fastened and the vehicle is driven at a speed faster than about 20 km/h (12 mph), the warning light will flash and a beep sound will be heard.

Once the beep sound is heard, it continues sounding even if the vehicle speed lowers to 20 km/h (12 mph) or less until the seat belt is fastened or the beep sound period has passed.

5-42