25
SETUP, con’t
ity for reproducing bass frequencies down to 35Hz
within -3dB of the midrange frequencies. If a Loud-
speaker can not reproduce bass frequencies down to
35Hz within -3dB of the midrange frequencies it is
considered SMALL.
1. Press the Up directional Push-button twice fol-
lowed by pressing the Left directional Push-but-
ton twice. The Center Channel Loudspeaker Icon
will now be highlighted.
2. Press the SELECT Push-button and arrowheads
will appear above and below the Icon of the Center
Channel Loudspeaker. Refer to figure 25.
3. Select the Speaker Icon Setting of Large, Small or
None, that agrees with your Sound System, by us-
ing the Up or Down directional Push-buttons.
The Loudspeaker Icon in figure 25 is for a Large
Loudspeaker, the Icon in figure 26 is of a Small
Loudspeaker and figure 27 illustrates no Center
Channel Loudspeaker present.
Note: If the no Center Channel is present in the
system, a phantom center channel will be
created using the Front Left and Right
Channels.
4. In a similar manner select the correct choice for the
Left & Right Front Channels, Subwoofer Channel
and Left & Right Surround Channels in the system
by using the four DIRECTIONAL and SELECT
Push-buttons.
Note: If there is no Subwoofer present in the system,
the Low Frequency Information below 100Hz
will be redirected to the Front Left and Right
Channels and only when they are set to Large.
A table, on page 28, is provided to record the
new Loudspeaker Size Adjustments.
5. Proceed to Loudspeaker Time Delay Settings.
LOUDSPEAKER TIME DELAY
The following Time Delay Adjustments will electroni-
cally compensate for different Loudspeaker Distances
from the Lis-
tening/View-
ing Area. Re-
fer to figure
28. Time de-
lay is mea-
sured in mil-
liseconds
(ms) and
each milli-
second corre-
sponds ap-
proximately Figure 27
Figure 26
Figure 25
Figure 28