rev_Breadmaker_IM 31/10/05 13:09 Side 34

UK

INTRODUCTION

To get the best out of your new breadmaker, please read through these instructions carefully before using it for the first time. Pay particular attention to the safety measures. We also recommend that you keep the instructions for future reference, so that you can remind yourself of the functions of the breadmaker.

IMPORTANT SAFETY MEASURES

•The breadmaker may only be used for its original purpose.

•This breadmaker is not suitable for commercial or outdoor use.

•Do not use the breadmaker if the cord or plug is damaged, if it is not functioning properly, or if it has been damaged by a heavy impact or similar.

•The breadmaker may only be connected to 230 V, 50 Hz.

•Do not block or cover the ventilation openings on the breadmaker.

•Do not switch the breadmaker on when it is empty.

•The breadmaker or cord must not be submerged in water or any other liquid. Do not use the appliance if your hands are wet or damp.

•The breadmaker and cord must not be exposed to strong heat, direct sunlight, humidity, sharp edges or similar.

•Do not allow the cord to hang over the edge of the counter, and keep it away from hot objects and naked flames.

•Only use accessories recommended by the manufacturer.

•Never leave the breadmaker unattended when in use and keep an eye on children.

•The baking pan, heating element and baking chamber become very hot during baking. Do not touch them before they have cooled down completely!

•Remove the plug from the socket after use, when cleaning or replacing accessories or if the breadmaker does not function normally. Switch the breadmaker off using the START/STOP button before unplugging it.

•Avoid pulling the cord when removing the plug from the socket. Instead, hold the plug.

•Never try to repair the breadmaker yourself.

•If the breadmaker, cord or plug needs to be repaired, it should be taken to an authorised service centre. If the appliance is subjected to unauthorised repairs, the guarantee will become void. Contact your retailer if the repairs fall under the terms of the guarantee.

KEY TO THE BREADMAKER’S PARTS

1.Lid

2.Carrying handle

3.Baking chamber

4.Heating element

5.Cord and plug

6.Control panel

7.Kneading paddle

8.Baking pan

9.Display

Buttons on the control panel:

10.TIME- (time setting down)

11.TIME+ (time setting up)

12.MENU (programme)

13.START/STOP

14.LOAF SIZE

15.COLOUR (crust)

PREPARING THE

BREADMAKER

Each individual breadmaker is checked at the factory, but for safety’s sake, after unpacking the breadmaker, you should check carefully that it has not been damaged during transport. If it appears that the breadmaker has been damaged, you must contact the shop where you bought it, and do not use it until it has been checked by an authorised specialist.

Before using the breadmaker, you should check that you have removed all packaging from it both inside and out.

Before using your breadmaker for the first time

The non-stick coating on the baking pan must be cleaned before use.

•Remove the baking pan (8) from the baking chamber (3) by turning it anti-clockwise slightly and lifting it out.

•Clean the baking chamber, heating element (4) and baking pan.

•Plug in. A long beep is heard and the display (9) shows 1 3:00. This means that the breadmaker is set to programme 1, and the cooking time is 3 hours.

•Grease the inside of the baking pan with butter or oil and place it in the baking chamber (must be twisted into place).

•Press the MENU (12) button repeatedly until the display shows 12 1:00 (programme 12, cooking time 1 hour), and switch on the breadmaker using the START/STOP button (13). The breadmaker begins to bake.

•Allow the baking pan to bake empty for about 10 minutes.

•Switch off the breadmaker by pressing and holding the START/STOP button for approximately 3 seconds until you hear a beep. The breadmaker has now been switched off. Open the lid and allow the baking pan to cool. Note that the display is reset to 1 3:00 when the breadmaker is switched off.

•Clean the baking chamber, heating element and baking pan again.

34

Page 33 Page 35
Page 34
Image 34
Melissa 643-043 manual Introduction, Important Safety Measures, KEY to the BREADMAKER’S Parts, Preparing Breadmaker
Page 33 Page 35

643-043 specifications

Melissa 643-043 is a cutting-edge software solution designed to enhance productivity and streamline workflows in various industries. Building upon advanced artificial intelligence and machine learning technologies, Melissa 643-043 provides businesses with the tools necessary to manage data efficiently, analyze customer interactions, and automate numerous processes.

One of the standout features of Melissa 643-043 is its robust data cleaning capability. The software automatically identifies and rectifies inaccuracies within large datasets, ensuring that organizations maintain high standards of data integrity. By eliminating duplicates, validating addresses, and enriching profiles with up-to-date information, Melissa not only enhances data quality but also empowers teams to make informed decisions.

Another significant characteristic of Melissa 643-043 is its flexibility. The solution is designed to integrate seamlessly with various platforms, including customer relationship management (CRM) systems, marketing automation tools, and enterprise resource planning (ERP) software. This interoperability allows businesses to leverage their existing technology stack while enhancing their systems with Melissa’s powerful functionalities.

Furthermore, the user-friendly interface of Melissa 643-043 makes it accessible for users of all technical backgrounds. With an intuitive design and straightforward navigation, employees can quickly adopt the software and start benefiting from its features without extensive training or technical expertise. This ease of use not only accelerates implementation but also fosters a smooth transition from existing systems.

The software also embraces advanced analytics capabilities, offering businesses valuable insights into customer behavior, market trends, and overall operational performance. By providing detailed reports and visualizations, Melissa 643-043 enables organizations to develop data-driven strategies, enhancing their competitive edge in the market.

Moreover, Melissa 643-043 places a strong emphasis on security and compliance. With data protection protocols in place, businesses can trust that their sensitive information is safeguarded against breaches and unauthorized access. This commitment to security helps organizations maintain compliance with various regulations, fostering customer trust.

In summary, Melissa 643-043 offers a comprehensive suite of features aimed at improving data quality, integration, user experience, analytics, and security. Its innovative approach positions it as an invaluable asset for organizations looking to enhance operational efficiency and drive growth in an increasingly data-driven world.
Top Page Image Contents