
Choosing standard settings
Configuring the DVD player
The DVD player provides a standard setting, called Type 1, which configures the 586 into the most commonly needed configuration.
Choosing Type 1 overrides any other configuration you may have performed, and so can be used to reset the configuration of the unit.
To restore the standard settings
●Switch off the 586, using the power switch on the back panel.
●Switch off any power amplifiers that are connected to the 586 and put any digital speakers to standby.
●Switch on the power again while holding down the Off key on the front panel.
Type 1
After a short delay the display will show:
●Wait for one second, and then switch off the 586 using the power switch on the back panel.
●Switch on again to use the 586 with the standard setting.
48