Using DSP5000C

22

 

 

∙tilt to 0.0

∙balance to middle

You cannot store settings in Normal mode. See page 39.

Recalling settings

The settings stored in the DSP5000C can be recalled at any time. When the display is normal (i.e. not a tone cursor):

1. Press Store

The DSP5000C will respond with

rEc.

Tip You can now compare the stored settings with the standard ones. Use the Clear key to restore a flat response, then Store to recall the stored settings.

Note When you change sources, you will need to press Store to recall any favourite tone setting you may have stored.

Note Clear does not reset the phase and axis settings.

DSP5000C User Guide