Operation 24
To select a track by number, press the appropriate number key or keys. For example, to select track 6
1. Press 6
The DSP5000C will respond with the display
–6
To engage this selection, press Play or wait for a short time.
To select track 15
1. Press 1 followed by 5
The DSP5000C will show
–15Again, press Play or wait for a short time.
If you select a track that does not exist on the disc, the DSP5000C will show an error message:
Err.Selecting index pointsTo select index points you need to enter both the track and index point by number. Press the appropriate number key or keys, followed by the decimal point key, followed by the index number. For example, to select track 6 index 2
1. Press 6
The DSP5000C will respond with the display
–6
2.Press decimal point , then
3.Press 2
The DSP5000C will respond with the display
–6.2To engage this selection, press Play or wait for a short time.
Setting up programmed sequencesTo set up a sequence use the number keys with the Store and Clear keys – as described in the CD player User Guide.
For example to store track 6:
1. Press 6
The DSP5000C will respond with the display
–6
2.Press Store
The DSP5000C will respond with the display
S.6For example to cancel track 4:
1. Press 4
The DSP5000C will respond with the display
–4
2.Press Cancel
The DSP5000C will respond with the display
DSP5000C User Guide