Help 50
Radio interferenceNote DSP5000C is designed to comply with all relevant international standards concerning
Note DSP5000C is a digital audio and computing device which has been designed to very high standards of electromagnetic compatibility.
FCC WARNING: This equipment generates and can radiate radio frequency energy, and if not installed and used correctly in accordance with our instructions may interfere with radio communications or radio and television reception. It has been
If this equipment does interfere with or suffer interference from radio or television reception, then the following measures should be tried:
1.Reorient the receiving aerial (or antenna), or route the antenna cable of the receiver as far away as possible from the DSP5000C and its cabling
2.Ensure that the receiver uses
3.Relocate the receiver with respect to the DSP5000C
4.Connect the receiver and this product to different AC outlets
5.If the problem persists, contact your dealer
EEC This product has been designed to comply with the limits set out in
EN55013 and EN55020C.
REMEMBER to switch all units off before changing any connections.
Cleaning
The cabinet of the DSP5000C is finished with veneer.
The display panel is glass, and should be cleaned using a barely damp chamois leather.
Do not use abrasive cleaners on any part of the DSP5000C.
The phono connectors on the rear of the DSP5000C are
Maintenance & service
The Meridian DSP5000C has been carefully designed to give years of untroubled service. There are no
In the unlikely event that your DSP5000C fails to function correctly, it should be returned, in its original packing, to your Meridian dealer. In case of difficulty, please write to the following address if you live in the UK:
Digital Gramophone & Wireless Ltd 14 Clifton Road
Huntingdon Cambridgeshire PE18 7EJ
DSP5000C User Guide