Operation 23

Controlling a Meridian CD player

Use of handset to control CD

You are advised to operate the system with the MSR.

Playing a disc

On the MSR, the following keys operate the Meridian CD:

To start a disc

1. Press Play

To stop the disc

1. Press Stop

To make the disc pause

1. Press Pause

The Pause indication on the Meridian CD will light up. If the DSP5000C master was displaying track or time information, it will display

PSE

To start it again (‘unpause’)

1. Press Pause

To cause a disc to repeat

1.Press Repeat

The Repeat light on the CD player will light up.

Scanning a disc

To move forward or backward in a track

1. Press u or v

Selecting tracks

To move on to the next track at any time

1. Press Play

or

Next and Previous can be used – as on the Meridian CD front panel – to select a track number. This will result in the appearance of the ‘select cursor’ display. For example

1.Press Next repeatedly until you see the 'select track 5' display. In 500 mode the display looks like:

–5

In 200 mode the display looks like:

S.5

You can now either engage Track 5 by pressing Play, or simply wait for the track to engage.

The DSP5000C directs instructions from the MSR to the current source.

Note When selecting tracks by number, you do not need to worry about Track and Preset buttons, as you do with the Meridian 209 remote control.

DSP5000C User Guide