MicroNet Technology SP5100 user manual User Line Number, Ring Configuration, Reboot

Choose ON or OFF to enable or disable PPPoE function.

(2)Username And Password

To set PPPoE connection user name and password.

(3)Retry When Disconnect

Choose ON or OFF to enable or disable this function. If users enable this function, after PPPoE being disconnected, IP Phone will automatically reboot to re-connect, and after reboot, if IP Phone still can’t get contact with server, IP Phone will keep trying to connect. On the other hand, if users disable this function, IP Phone won’t reboot and keep trying to connect.

6.Reboot

It is necessary and important for user to reboot it after any configurations has been made to the SP5100 IP Phone.

2.User Line Number

User has to identify at least one number for the SP5100 IP Phone to register to the Gatekeeper. User can set up to 10 different numbers.

(1)Line Number 1

(2)Line Number 2

(3)Line Number 3

(4)Line Number 4

(5)Line Number 5

(6)Line Number 6

(7)Line Number 7

(8)Line Number 8

(9)Line Number 9

(10)Line Number 10

Note:

User can set six zero “000000” on LCD to disable this number and the number after this one. Ex. Line Number 1-5 are configured, if user set Line 3 as “000000”, Line number 3-5 will be disabled.

3.Ring Configuration

(1)Ring Style Selection

There are three tone styles for SP5100 IP Phone. Move the “~” symbol by pressing Í or Î on the keypad to select the tone style preferred. Then press

14