MicroNet Technology SP5100 user manual Advanced Configurations via Telnet, help command

5 Advanced Configurations via Telnet

After initializing the SP5100 IP Phone IP Address setting (please refer to LCD Configuration: 1.Connect Configuration), user can enter into configuration mode via telnet.

Note:

●After user enter IP Phone configuration via telnet, please use login : ”root”,

password : ”press enter” to enter command line.

●Each command user must key-in with lower case, but contents of configurations such as h.323 alias or user name etc, user can set as capital case.

●User who changes any configuration needs to do the commit command then reboot command.

5.1 [help] command

Type help, man or ? to display all the command lists. The following figure is shown all commands of SP5100 IP Phone.

39