MicroNet Technology SP5100 user manual Tos command, High priority with DS-field

• -maxdealy: set maximum delay of jitter buffer (0~150)

Note: It is for advanced administrator use only. Please ask your distributor before changing any settings of this command.

5.15 [tos] command

ToS/DiffServ (DS) priority function can discriminate the Differentiated Service Codepoint (DSCP) of the DS field in the IP packet header, and map each Codepoint to a corresponding egress traffic priority. As per the definition in RFC2474, the DS field is Type-of-Service (ToS) octet in IPv4. The recommended DiffServ Codepoint is defined in RFC2597 to classify the traffic into different service classes. The mapping of Codepoint value of DS-field to egress traffic priority is shown as follows.

High priority with DS-field.
(1)Expected Forwarding (EF)	101110	====>	46 (Decimal System)
(2)Assured Forwarding (AF)	001010	====>	10 (Decimal System)
	010010	====>	18 (Decimal System)

51