Manuals / MicroNet Technology / Communications / IP Phone

MicroNet Technology SP5100 user manual Phone Book For Peer-to-Peer mode only

Models: SP5100

1 58

Page 32

3.11Phone Book (For Peer-to-Peer mode only)

User can specify 20 sets of phone book via web interface. Input the Name, IP Address and E.164 No. of the destination device.

Page 32

Image 32

MicroNet Technology SP5100 user manual Phone Book For Peer-to-Peer mode only

Contents

Internet IP Telephone User’s ManualModel No. SP5100 VersionTable of Contents 5 ADVANCED CONFIGURATIONS VIA TELNETIFADDR COMMAND 1.1 Product Description Features and Specification1 Introduction Volume Adjustment Audio featuresFirmware Upgrade Management Features1. Front View and Keypad function 1.2 AppearanceCorresponding list of keypad and symbol TRANSFER n o p q 1.3 Specification of connector Ethernet connector（LAN） 2、 RJ11connector：RJ11 connector is for connecting IP Phone with PSTN RJ11connector 1、 Ethernet Port：2 Operating Procedure - LCD Display 2.1 Initialize SP5100 IP Phone2.2 LCD Configuration 1. Connect Configuration8 SNTP Configuration 3 Gateway4 Primary DNS 5 Secondary DNS11 Token Password 8,which means GMT+8.user can press “*” as “-“If user didn’t set SNTP server, on LCD won’t display current time 9 Connection Mode3. Firmware Update 5. PPPoE Configuration2. User Line Name 4. Hardware Test6. Reboot 3. Ring Configuration2. User Line Number 4. Indicate Forward Type 5. Message Box7. PPPoE Information 6. Phone Address BookStep1. Browse the IP Address predefined via Keypad or TELNET 3 Web ConfigurationStep2. Input the login name and password Step 3. The web interface main screen Step 4. Start configure 3.1 Network Configure Please be notedto input any values 3.2 H323 Configure Token Password Set Token password for H.235 security use Response Timeout Connection Timeout For Advanced User onlyRTP Port Time to Live TTL3.3 System Configure H.450 Related Features Enable/Disable H.450 functionKeypad Type Select different DTMF Keypad Type For Advanced User Dial Plan Set DTMF digit limitation 0 is for any digits3.4 PPPoE Configure Device Enable/Disable PPPoE functionPassword Set PPPoE Connection password User Name Set PPPoE Connection User Name3.5 DDNS Configure 3.6 Voice Configure For Advanced User 3.7 Tone Configure For Advanced User Set the above tone Frequency, Level and On/Off time3.8 Bureau Configure Enable to do Fast Start Enable to open H.245 TunnelingEnable/Disable open H.245 channel after fast start 3.9 Support Functions Both side must support3.10 DSCP Configure Set Signal or RTP Packet DSCP valueAssured Forwarding AF PHB Select Delay priority and Drop Precedence Default Select ToS value as3.11 Phone Book For Peer-to-Peer mode only 3.12 Password 3.13 Firmware Upgrade Target File name Set file name prepared to upgradeFTP Login Set FTP login name and password Target File Type Select which sector of IP Phone to upgrade3.14 System Command Press reboot will reset IP Phone3.15 Version Information Display current version list4 Upgrade the SP5100 IP Phone 4.1 LCD Panel Control4.2 Remote Control Telnet 4.3 Web Management Target File name Set file name prepared to upgradeFTP Login Set FTP login name and password Target File Type Select which sector of IP Phone to upgrade5 Advanced Configurations via Telnet 5.1 help command5.4 flash command 5.2 quit command5.3 reboot command 5.5 commit command 5.6 ifaddr command5.7 time command Note Please refer to the ifaddr command to configure sntp server5.8 ping command 5.9 pbook command5.10 ddns command Note Please dial “#” after dial e.164 of pbook5.11 pppoe command 5.12 sysconf command 5.13 h323 command h323 -e164 “X” q931 assign Q.931 port for call signaling ras assign RAS port rtp assign RTP port number1024-65535 ttlset RAS TTL time0-3600 secondgkfind assign Gatekeeper finding port number1024-65535 ras assign Gatekeeper RAS port1024-655355.14 voice command 5.15 tos command High priority with DS-fieldLow Priority with DS-field 5.16 tone command 5.17 support command 5.18 bureau command5.19 rom command 5.20 passwd command rom -app -f lp.5055.21 rbtone command