MicroNet Technology SP5100 user manual rom command

5.19 [rom] command

•-print: show versions of all rom files.

•-app,-boot,-dsptest,-dspcore,-dspapp,-rbpcm and -htpcm: upgrade main boot code, main application code, DSP testing code, DSP kernel code, DSP application code, Ring Back Tone PCM file and Hold Tone .

•-boot2m:to upgrade 2mb rom file, which includes all firmware file mentioned in item 2.

Note:

1.After 2mb file download is finished, all configurations might change to default value, user has to configure again.

2.MAC address might change to default value also, please MUST use command setmac:

Usage: key in command setmac

key in MAC address with format: 0001a800xxxx

•-s: it is necessary to prepare TFTP/FTP server IP address for upgrading firmware rom file.

•-f: the file name prepared for upgrading is necessary as well.

•-server: specify TFTP/FTP server IP address. It is corresponding to LCD configuration -firmware upgrade-Set file Server IP.

•-method: specify download method to be TFTP or FTP(0 for TFTP.1 for FTP)

•-ftp: specify user name and password for FTP download method

•For example: User prepares to upgrade the latest app rom file – lp.505, the TFTP server is 192.168.1.1

rom –app–s 192.168.1.1 –f lp.505(If –server is specified , can just type

55