HP 53131A, 132A manual Input Channels Conditioning Keys to Scpi Command Map Part 2

Chapter 2 Command Summary

Front Panel to SCPI Command Maps

Input Channels Conditioning Keys to SCPI Command Map (Cont.)

1 a. [:SENSe]:EVENt[12]:LEVel[:ABSolute]:AUTO ONOFF

b1. [:SENSe]:EVENt[12]:LEVel[:ABSolute] <numeric_value> [V]

b2. [:SENSe]:EVENt[12]:LEVel:RELative <numeric_value> [PCT]

c.[:SENSe]:EVENt[12]:SLOPe POSitive NEGative

d1. [:SENSe]:EVENt[12]:HYSTeresis:RELative 100 *

d2. [:SENSe]:EVENt[12]:HYSTeresis:RELative 50

d3. [:SENSe]:EVENt[12]:HYSTeresis:RELative 0 **

e1. [:SENSe]:EVENt2:FEED “[:]INPut[1]”

e2. [:SENSe]:EVENt2:FEED “[:]INPut2”

2:INPut[12]:IMPedance <nume ric_value> [OHM]

3:INPut[12]:COUPling ACDC

4a1. :INPut[12]:ATTenuation 1

a2. :INPut[12]:ATTenuation 10

5:INPut[12]:FILTer ON OFF

6:INPut3:COUPling?

:INPut3:IMPedance?

__________________________

*Note, in firmware revisions 3317, 3335 and 3402, use 0.

**Note, in firmware revisions 3317, 3335 and 3402, use 100.

Figure 2-1. Input Channels Conditioning Keys to SCPI Command Map (Part 2 of 2)

Programming Guide 2-5