Chapter 4 Command Reference

Introduction

:STATus:QUEStionable:PTRansition <non-decimal numeric> <NRf>

Range

Query Response

Comments

Sets or queries the positive transition filter for the Questionable Data status reporting structure.

The parameter and query response value, when rounded to an integer value and expressed in base 2 (binary), represents the bit values of the positive transition filter. The value of unused bits is zero when queried and ignored when set.

A TRUE bit (in the positive transition filter) specifies that a positive (FALSE to TRUE) transition of the corresponding bit in the Questionable Data Condition Status Register generates the corresponding event in the Questionable Data Event Status Register.

The range of the <non-decimal numeric> or <NRf> parameter is 0 to 65,535.

Numeric data transferred as ASCII bytes in <NR1> format.

∙At power-on and :STAT:PRES, the positive transition filter is preset such that each bit is a 1 (TRUE).

∙This value is unaffected by *RST and save/recall.

Programming Guide

4-113