HP 132A, 53131A Front Panel to SCPI Command Maps, MEASURE Keys to SCPI Command Map (Cont.), Figure 2-3.MEASURE Keys to SCPI Command Map (Part 2 of 2)

Chapter 2 Command Summary

Front Panel to SCPI Command Maps

MEASURE Keys to SCPI Command Map (Cont.)

1a. [:SENSe]:FUNCtion[:ON] “[:][XNONe:]FREQuency [1 2 3] ”

b.[:SENSe]:FUNCtion[:ON] “[:][XNONe:]FREQuency:RATio [1,2 1,3 2,1 3,1] ”

2a. [:SENSe]:FUNCtion[:ON] “[:][XNONe:]TOTalize [1] ”

b.[:SENSe]:FUNCtion[:ON] “[:][XNONe:]PHASe [1,2] ”

c.[:SENSe]:FUNCtion[:ON] “[:][XNONe:]DCYCle [1] ”

d.[:SENSe]:FUNCtion[:ON] “[:][XNONe:]VOLTage:MINimum [1] ”

OR

[:SENSe]:FUNCtion[:ON] “[:][XNONe:]VOLTage:MAXimum [1] ”

e.[:SENSe]:FUNCtion[:ON] “[:][XNONe:]VOLTage:MINimum 2 ”

OR

[:SENSe]:FUNCtion[:ON] “[:][XNONe:]VOLTage:MAXimum 2 ”

3a. [:SENSe]:FUNCtion[:ON] “[:][XNONe:]TINTerval [1,2] ”

b.[:SENSe]:FUNCtion[:ON] “[:][XNONe:]PERiod [1] ”

c.[:SENSe]:FUNCtion[:ON] “[:][XNONe:]RISE:TIME [1] ”

d.[:SENSe]:FUNCtion[:ON] “[:][XNONe:]FALL:TIME [1] ”

e.[:SENSe]:FUNCtion[:ON] “[:][XNONe:]PWIDth [1] ”

f.[:SENSe]:FUNCtion[:ON] “[:][XNONe:]NWIDth [1] ”

Since the primary purpose of these front-panel keys is to change the function, the corresponding [:SENSe]:FUNCtion[:ON] command is listed in the menu map above. The front-panel keys, however, invoke couplings which affect other settings, whereas the [:SENSe]:FUNCtion[:ON] command does not.

Figure 2-3. MEASURE Keys to SCPI Command Map (Part 2 of 2)

Programming Guide 2-9