Manuals / Brands / Kitchen Appliance / Water Dispenser / HP / Kitchen Appliance / Water Dispenser

HP 132A, 53131A :INPut3:COUPling, :INPut3:IMPedance, 9.91E37, :INPut3 Subsystem

1 330

Download 330 pages, 3.81 Mb

Chapter 4 Command Reference

:INPut3 Subsystem

:INPut3 Subsystem

This subsystem queries the characteristics of the Counter’s

channel 3 input port. These commands are only available if Option 030/050 is installed.

:INPut3:COUPling?

Queries the channel 3 input coupling .

Query Response A sequence of ASCII-encoded bytes: AC

Comments This command is only available if Option 030/050 is installed.

:INPut3:IMPedance?

Query Response

Comments

Queries the channel 3 input impedance .

Numeric data transferred as ASCII bytes in <NR3> format with six significant digits.

The value returned is 50, or Not a Number 9.91E37 if Option 030/050 Channel 3 is not installed.

∙Units are Ohms.

∙This command is only available if Option 030/050 is installed.

4-50	Programming Guide

Contents

Page Page Page Page 1 Before You Start Command Summary Remote Operation Status Reporting How to Program the Counter for Status Reporting How to Program the Counter to Display Results How to Program the Counter to Synchronize Measurements Operations Writing SCPI Programs Page 4 Command Reference :STATus Subsystem :SYSTem Subsystem :TRACe Subsystem Command) *DMC <string>, <arbitrary block 5 Errors Page Page NOTE Programming Guide Contents HP 53131A Containing Firmware Revisions (3317, 3335, or 3402) Calibrations Utility Differences Between Prior and Current Revisions of the HP 53131A/132A Measurements Statistics ON SINGLE: :CONFigure:TOTalize:TIMed :CONFigure:TOTalize:CONTinuous :MEASure:TOTalize:TIMed HP 53132A Time Interval De lay Arming Getting Started New Users What You Should Understand Learning to Program the Counter Experienced Programmers How to Use This Guide Applications ∙Table of Contents Before You Start Command Summary Command Reference Errors Related Documentation Page Page Page Page Front Panel to SCPI Command Maps Some SCPI Syntax Conventions Input Channels Conditioning Keys to SCPI Command Map Input Channels Conditioning Keys to SCPI Command Map (Cont.) Figure 2-1.Input Channels Conditioning Keys to SCPI Command Map (Part 2 of 2) Instrument Control, Utility, Recall, and Save & Print Keys to SCPI Command Map Page MEASURE Keys to SCPI Command Map MEASURE Keys to SCPI Command Map (Cont.) Figure 2-3.MEASURE Keys to SCPI Command Map (Part 2 of 2) Gate & ExtArm Key to SCPI Command Map Figure 2-4.Gate & ExtArm Key to SCPI Command Map (Part 1 of 6) Gate & ExtArm Key to SCPI Command Map (Cont.) Freq, Period, Ratio Phase Figure 2-4.Gate & ExtArm Key to SCPI Command Map (Part 2 of 6) Totalize Rise Time, Fall Time, +/- Pulse Width, Dutycycle Figure 2-4.Gate & ExtArm Key to SCPI Command Map (Part 3 of 6) Time Interval Figure 2-4.Gate & ExtArm Key to SCPI Command Map (Part 4 of 6) Figure 2-4.Gate & ExtArm Key to SCPI Command Map (Part 5 of 6) Figure 2-4.Gate & ExtArm Key to SCPI Command Map (Part 6 of 6) LIMITS and MATH Keys to SCPI Command Map LIMITS and MATH Keys to SCPI Command Map (Cont.) Figure 2-5.LIMITS and MATH Keys to SCPI Command Map (Part 2 of 2) Calibration Menu to SCPI Command Map Calibration Menu to SCPI Command Map (Cont.) Scale & Offset Figure 2-6.Calibration Menu to SCPI Command Map (Part 2 of 2) HP 53131A/132A Command Summary SCPI Conformance Information IEEE 488.2 Common Commands Table 2-1.IEEE 488.2 Common Commands Table 2-1.IEEE 488.2 Common Commands (Continued) HP 53131A/132A SCPI Subsystem Commands is a “Query Only” command Std/New Column Std/New Parameter Form Column Table 2-2.HP 53131A/132A SCPI Command Summary Table 2-2.HP 53131A/132A SCPI Command Summary (Continued) Page Page Page Page Page Page Page Page Page Page Page Table 2-2A.HP 53132A (S/N Prefix 3646 and Above) Time Interval Arming SCPI Command Summary Arming SCPI Command Summary (Continued) *RST Response Table 2-3.HP 53131A /132A *RST State Table 2-3.HP 53131A/132A *RST State (Continued) Table 2-3B.HP 53132A (S/N 3646 and above) Time Interval *RST State Table 2-4.Unaffected by *RST Page Page ∙ Programming Examples Where to Find Some Specific Information Elements of SCPI Commands Where to Find HP BASIC Programming Examples Where to Find QuickBASIC Programming Examples Where to Find Turbo C Programming Examples Configuring the HP-IB To Set the HP-IBMode and Address Recall (Utility) HP-IB HP-IB: TALK Enter BE SURE to press the Enter key to complete the entry To Connect the Counter to a Computer Figure 3-1. HP-IBInterconnection Remote/Local Operation Save & Print Common Command Format SCPI Command and Query Format Subsystem Command Syntax Figure 3-2.Simplified Program Command Syntax Diagram Common Command Syntax Figure 3-3.Simplified Common Command Syntax Diagram Abbreviated Commands Keyword Separator Optional Keyword Implied Channel (Optional Numeric Keyword Suffix) Parameter Types Table 3-1.Command and Query Parameter Types Parameter Separator Query Parameters Suffixes Suffix Elements Suffix Multipliers Table 3-2.Suffix Multipliers Command Terminator Using Multiple Commands Program Messages Program Message Syntax Figure 3-4.Simplified Program Message Syntax Diagram Page Overview of Response Message Formats Response Messages Response Message Syntax Figure 3-5.Simplified Response Message Syntax Diagram Response Message Data Types Table 3-3.Response Message Data Types Table 3-3.Response Message Data Types (Continued) Page Status Reporting Figure 3-6.HP 53131A/132A SCPI Status Reporting Summary Functional Diagram Status Byte Register and Service Request Enable Register Figure 3-7.Status Byte and Service Request Enable Status Byte Register Table 3-4.Status Byte Register Bits 0–2 Bit 3 (QSB) Bit 4 (MAV) Bit 5 (ESB) Bit 6 (RQS/MSS) Bit 7 (OSB) Service Request Enable Register Standard Event Status Register Group Figure 3-8.Standard Event Status Reporting Standard Event Status Register Table 3-5.Standard Event Status Register Bit 0 (Operation Complete) Bit Bit 2 (Query Error) (Device-Specific Error) Bit 4 (Execution Error) Bit 5 (Command Error) Bit 7 (Power On) Figure 3-9.Operation and Questionable Status Reporting Model Condition Register Transition Filter Table 3-6.Transition Filter Definition Event Register Event Enable Register Operation Status Register Group Table 3-7.Operation Status Register Bit 0 (Calibrating) 1–3 Bit 4 (Measuring) 5–7 Bit 8 (Computing Statistics) Bit 9 (Using Internal Reference) 11–15 Questionable Data/Signal Status Register Group Table 3-8.Questionable Data/Signal Status Register 0–1 Bit 2 (Time) 3–4 Bit 5 (Frequency) Bit 6 (Phase) Bit 10 (Out of Limit Event) 11–13 Bit 14 (Command Warning) Commands to Set Counter for Optimal Throughput Disable auto trigger on measurement channel(s): Set gate/arm to auto for appropriate measurement: Define device trigger to FETC?: Command Settings for Optimizing Throughput Set reference oscillator to non-autostate (internal or external): Disable checking of external source if using external reference oscillator: Disable display: Disable printing: Table 3-9.Typical Optimizing Throughput Results in Measurements per Second How to Program the Counter for Status Reporting Determining the Condition of the Counter Resetting the Counter and Clearing the HP-IBInterface— Example Event Status Register Questionable Data Status Register Example Operation Status Register Figure 3-10.Status Reporting Flowchart (1 of 2) Figure 3-10.Status Reporting Flowchart (2 of 2) Configuring the Counter ’s Display Commands for Displaying Non-Scaled/OffsetResults How to Program the Counter to Display Results Commands for Displaying Scaled/Offset Results Commands for Displaying the Limit Graph Commands for Displaying Statistics Results Commands for Enabling and Disabling the Display How to Program the Counter to Synchronize Measurements Synchronizing Measurement Completion Resetting the Counter and Clearing the HP-IBInterface Using the *WAI Command Using the *OPC? Command Using the *OPC Command to Assert SRQ Page Updating Math and Limit Results Over HP-IB One of the things this command does is disable the automatic automatically How to Program the Counter for Math/Limit Operations Using the Scale and Offset Over HP-IB Page How to Program the Counter to Define Macros Page Page Page Writing SCPI Programs Figure 3-11.SCPI Programming Flowchart (Sheet 1 of 2) Figure 3-11.SCPI Programming Flowchart (Sheet 2 of 2) Programming Examples Using HP BASIC To Send a Double-QuotedString To Send a Single-QuotedString Using QuickBASIC Using Turbo C List of the Programming Examples Easiest Way to Make a Measurement (HP BASIC) Easiest Way to Make a Measurement (HP BASIC) (Continued) To Make a Frequency Measurement (HP BASIC) To Perform Limit Testing (HP BASIC) To Measure the Statistics of 50 Measurements (HP BASIC) To Measure the Statistics of 50 Measurements (HP BASIC) (Continued) To Use Limits to Filter Data Before Measuring Stats (HP BASIC) BASIC) (Continued) To Read and Store Calibration Information (HP BASIC) To Perform a Time Interval Calibration (HP BASIC) To Perform a Time Interval Calibration (HP BASIC) (Continued) Page (Continued) To Optimize Throughput (HP BASIC) To Optimize Throughput (HP BASIC) (Continued) To Use Macros (HP BASIC) To Use Macros (HP BASIC) (Continued) To Make a Frequency Measurement (QuickBASIC) To Perform Limit Testing (QuickBASIC) To Perform Limit Testing (QuickBASIC) (Continued) To Measure the Statistics of 50 Measurements (QuickBASIC) To Measure the Statistics of 50 Measurements (QuickBASIC) (Continued) To Use Limits to Filter Data Before Measuring Stats (QuickBASIC) To Use Limits to Filter Data Before Measuring Stats (QuickBASIC) (Continued) Page To Read and Store Calibration Data (QuickBASIC) To Optimize Throughput (QuickBASIC) To Optimize Throughput (QuickBASIC) (Continued) To Use Macros (QuickBASIC) To Use Macros (QuickBASIC) (Continued) Page To Make a Frequency Measurement (Turbo C) To Make a Frequency Measurement (Turbo C) (Continued) To Use Limits to Filter Data Before Measuring Statistics (Turbo C) To Use Limits to Filter Data Before Measuring Statistics (Turbo C) (Continued) Page To Optimize Throughput (Turbo C) To Optimize Throughput (Turbo C) (Continued) Page Page Page Page :ABORt Page Page :CALCulate[1]:DATA :CALCulate[1]:FEED “[:]SENSe[1]” :CALCulate[1]:IMMediate :CALCulate[1]:IMMediate:AUTO <Boolean :CALCulate[1]:MATH[:EXPRession]:CATalog :CALCulate[1]:MATH[:EXPRession][:DEFine] :CALCulate[1]:MATH[:EXPRession]:NAME SCALE_OFFSET or :CALCulate[1]:MATH[:EXPRession]:SELect SCALE_OFFSET :CALCulate[1]:MATH:STATe <Boolean :CALCulate2:FEED “[:]CALCulate[1]” :CALCulate2:IMMediate :CALCulate2:IMMediate:AUTO <Boolean :CALCulate2:LIMit:CLEar:AUTO <Boolean :CALCulate2:LIMit:CLEar[:IMMediate] :CALCulate2:LIMit:DISPlay GRAPh | NUMBer :CALCulate2:LIMit:FAIL :CALCulate2:LIMit:FCOunt:LOWer :CALCulate2:LIMit:FCOunt[:TOTal] :CALCulate2:LIMit:FCOunt:UPPer :CALCulate2:LIMit:LOWer[:DATA] <numeric_value> [HZ | S |DEG] :CALCulate2:LIMit:PCOunt[:TOTal] :CALCulate2:LIMit:STATe <Boolean :CALCulate2:LIMit:UPPer[:DATA] <numeric_value> [HZ | S | DEG] :CALCulate3:AVERage:ALL :CALCulate3:AVERage:CLEar :CALCulate3:AVERage:COUNt <numeric_value :CALCulate3:AVERage:COUNt:CURRent :CALCulate3:AVERage[:STATe] <Boolean :CALCulate3:AVERage:TYPE MAXimum | MINimum | SDEViation | SCALar or MEAN :CALCulate3:DATA :CALCulate3:FEED “[:]CALCulate[1]” :CALCulate3:LFILter:LOWer[:DATA] <numeric_value> [HZ | S |DEG] :CALCulate3:LFILter:STATe <Boolean :CALCulate3:LFILter:UPPer[:DATA] <numeric_value> [HZ | S | DEG] :CALCulate3:PATH :CALibration[:ALL] :CALibration:COUNt :CALibration:DATA <arbitrary block :CALibration:SECurity:CODE <NRf :CALibration:SECurity:STATe <Boolean>, <NRf Page :CONFigure Subsystem Device Clear :DIAGnostic:CALibration:INPut[1|2]:GAIN: AUTO ONCE | OFF :DIAGnostic:CALibration:INPut[1|2]:OFFSet: :DIAGnostic:CALibration:INTerpolator:AUTO ONCE | OFF |ON :DIAGnostic:CALibration:ROSCillator:AUTO ONCE | OFF :DIAGnostic:CALibration:STATus :DIAGnostic:CALibration:TINTerval:FINE[1|2|3|4] :DIAGnostic:CALibration:TINTerval:QUICk :DISPlay:ENABle <Boolean :DISPlay:MENU[:STATe] OFF :DISPlay[:WINDow]:TEXT:FEED “[:]CALCulate2” | “[:]CALCulate3” :DISPlay[:WINDow]:TEXT:RADix COMMa | DPOint :FETCh Subsystem :FORMat[:DATA] ASCii | REAL Group Execute Trigger (GET) :HCOPy:CONTinuous <Boolean :INITiate:AUTO <Boolean :INITiate:CONTinuous <Boolean Page :INITiate[:IMMediate] Stop/Single :INPut[1|2]:ATTenuation 1 | :INPut[1|2]:COUPling AC | DC :INPut[1|2]:FILTer[:LPASs][:STATe] <Boolean :INPut[1|2]:IMPedance <numeric_value> [OHM] :INPut3:COUPling :INPut3:IMPedance Page Measurement Instructions (:CONFigure, :FETCh, :MEASure, :READ) :CONFigure[:SCALar]:<function> <parameters> [,<source_list>] :CONFigure FETCh[[:SCALar]:<function>] :MEASure[:SCALar]:<function>? <parameters> [,<source_list>] :READ[[:SCALar]:<function>] Page Page Descriptions of the Measurement Functions— <function Firmware Revision CAUTION :MEASure[:SCALar][:VOLTage]:DCYCle? [<reference>][,(@1)] Page :MEASure[:SCALar][:VOLTage]:FALL:TIME? (Cont.) :MEASure[:SCALar][:VOLTage]:FREQuency? (Cont.) :MEASure[:SCALar][:VOLTage]:FREQuency:RATio? [<expected_value>[,<resolution>]] [, (@1), (@2) | (@1), (@3) | (@2), (@1) | (@3), (@1) ] :MEASure[:SCALar][:VOLTage]:FREQuency:RATio? (Cont.) :MEASure[:SCALar][:VOLTage]:MAXimum? [(@1)|(@2)] :MEASure[:SCALar][:VOLTage]:MINimum? [(@1)|(@2)] :MEASure[:SCALar][:VOLTage]:NWIDth? [<reference>][,(@1)] Page :MEASure[:SCALar][:VOLTage]:PERiod? (Cont.) :MEASure[:SCALar][:VOLTage]:PHASe? [(@1),(@2)] :MEASure[:SCALar][:VOLTage]:PTPeak? [(@1)|(@2)] :MEASure[:SCALar][:VOLTage]:PWIDth? [<reference>][,(@1)] :MEASure[:SCALar][:VOLTage]:PWIDth? [<reference>][,(@1)] (Cont.) :MEASure[:SCALar][:VOLTage]:RISE:TIME? (Cont.) :MEASure[:SCALar][:VOLTage]:TINTerval? [(@1),(@2)] :CONFigure[:SCALar][:VOLTage]:TOTalize:CONTinuous [(@1)] :MEASure[:SCALar][:VOLTage]:TOTalize:TIMed? [<gate_time>][,(@1)] How to Use the Measurement Instruction Commands Using :MEAsure How to Use the Measurement Instruction Commands (Cont.) Using :CONFigure with :READ Using :CONFigure with :INITiate and :FETCh Firmware Revision Work-AroundCommands Firmware Revision Page :MEMory:DELete:MACRo<string :MEMory:FREE:MACRo :MEMory:NSTates [:SENSe]:DATA? [“[:]SENSe[1]”] [:SENSe]:EVENt2:FEED “[:]INPut[1] | [:]INPut2” [:SENSe]:EVENt[1|2]:HYSTeresis:RELative <numeric_value> [PCT] [:SENSe]:EVENt[1|2]:LEVel[:ABSolute] <numeric_value> [V] [:SENSe]:EVENt[1|2]:LEVel[:ABSolute]:AUTO <Boolean [:SENSe]:EVENt[1|2]:LEVel:RELative <numeric_value> [PCT] [:SENSe]:EVENt[1|2]:SLOPe POSitive | NEGative [:SENSe]:EVENt3:LEVel[:ABSolute] [:SENSe]:EVENt3:SLOPe [:SENSe]:FREQuency:ARM[:STARt]:SLOPe POSitive | NEGative [:SENSe]:FREQuency:ARM[:STARt]:SOURce IMMediate |EXTernal [:SENSe]:FREQuency:ARM:STOP:DIGits <numeric_value [:SENSe]:FREQuency:ARM:STOP:SLOPe POSitive | NEGative [:SENSe]:FREQuency:ARM:STOP:SOURce IMMediate | EXTernal | TIMer | DIGits [:SENSe]:FREQuency:ARM:STOP:TIMer <numeric_value> [S] [:SENSe]:FREQuency:EXPected[1|2|3] <numeric_value> [HZ] [:SENSe]:FREQuency:EXPected[1|2|3]:AUTO ON [:SENSe]:FUNCtion[:ON] <sensor_function Page [:SENSe]:PHASe:ARM[:STARt]:SLOPe POSitive | NEGative [:SENSe]:PHASe:ARM[:STARt]:SOURce IMMediate | EXTernal [:SENSe]:ROSCillator:EXTernal:CHECk ON | OFF | ONCE [:SENSe]:ROSCillator:EXTernal:FREQuency [:SENSe]:ROSCillator:SOURce INTernal | EXTernal [:SENSe]:ROSCillator:SOURce:AUTO <Boolean [:SENSe]:TINTerval:ARM[:STARt]:SLOPe POSitive | NEGative [:SENSe]:TINTerval:ARM[:STARt]:SOURce IMMediate | EXTernal [:SENSe]:TINTerval:ARM:STOP:SOURce IMMediate | TIMer [:SENSe]:TINTerval:ARM:STOP:TIMer <numeric_value> [S] Page [:SENSe]:TINTerval Subtree (HP 53132A With S/N Prefix 3646 and Above) [:SENSe]:TINTerval:ARM:ESTART and :ESTOP Subtrees (HP 53132A With S/N Prefix 3646 and Above) Page [:SENSe]:TINTerval:ARM:ESTART:LAYer2:SLOPe POSitive | NEGative [:SENSe]:TINTerval:ARM:ESTART:LAYer2:SOURce IMMediate | EXTernal [:SENSe]:TINTerval:ARM:ESTART[:LAYer[1]]:ECOunt <numeric_value [:SENSe]:TINTerval:ARM:ESTART[:LAYer[1]]:SOURce IMMediate | TIMer | INTernal[1] [:SENSe]:TINTerval:ARM:ESTART[:LAYer[1]]:TIMer <numeric_value> [S] [:SENSe]:TINTerval:ARM:ESTOP:LAYer2:SLOPe POSitive | NEGative [:SENSe]:TINTerval:ARM:ESTOP:LAYer2:SOURce IMMediate | EXTernal [:SENSe]:TINTerval:ARM:ESTOP[:LAYer[1]]:ECOunt <numeric_value [:SENSe]:TINTerval:ARM:ESTOP[:LAYer[1]]:SOURce IMMediate | TIMer | INTernal2 [:SENSe]:TINTerval:ARM:ESTOP[:LAYer[1]]:TIMer <numeric_value> [S] [:SENSe]:TOTalize:ARM[:STARt]:SLOPe POSitive | NEGative [:SENSe]:TOTalize:ARM[:STARt]:SOURce IMMediate | EXTernal [:SENSe]:TOTalize:ARM:STOP:SLOPe POSitive | NEGative [:SENSe]:TOTalize:ARM:STOP:SOURce IMMediate | EXTernal TIMer [:SENSe]:TOTalize:ARM:STOP:TIMer <numeric_value> [S] :STATus:OPERation:CONDition :STATus:OPERation:ENABle <non-decimalnumeric> | <NRf :STATus:OPERation[:EVENt] :STATus:OPERation:NTRansition <non-decimalnumeric> | <NRf :STATus:OPERation:PTRansition <non-decimalnumeric> | <NRf :STATus:PRESet :STATus:QUEStionable:CONDition :STATus:QUEStionable:ENABle <non-decimalnumeric> | <NRf :STATus:QUEStionable[:EVENt] :STATus:QUEStionable:NTRansition <non-decimalnumeric> | <NRf :STATus:QUEStionable:PTRansition <non-decimalnumeric> | <NRf :SYSTem:COMMunicate:SERial:CONTrol:DTR IBFull | ON | LIMit :SYSTem:COMMunicate:SERial:TRANsmit:BAUD <numeric_value :SYSTem:COMMunicate:SERial:TRANsmit:PACE XON | NONE :SYSTem:COMMunicate:SERial:TRANsmit:PARity[:TYPE] EVEN | ODD | NONE :SYSTem:ERRor :SYSTem:KEY <numeric_value Page :SYSTem:KEY:LOG :SYSTem:VERSion :TRACe:CATalog OFFSET <numeric_value> [HZ | S | DEG] <arbitrary block :TRACe[:DATA] SCALE, <numeric_value :TRACe[:DATA] SCALE, <arbitrary block SCALE :TRIGger:COUNt:AUTO <Boolean *CAL *CLS *DDT <arbitrary block *DMC <string>, <arbitrary block *EMC <NRf *EMC *ESE <NRf *ESE *ESR *GMC? <string *IDN *LMC *OPC *OPC *OPT *PMC *RCL <NRf *RST *SAV <NRf *SRE <NRf *SRE *STB *TRG *TST *WAI *WAI (Wait-to-ContinueCommand) Page HP-IB <error number>, <error string -113,“Undefined header” +0, “No error” Error Queue 350, “Queue overflow” +0, “No error” Error Types Table 5-1.Error Types No Error 0, “No error” Command Error Execution Error Device- or Counter-SpecificError Query Error Table Errors Table 5-2.Errors (Continued)