HP 53131A, 132A manual Stop/Single

Comments

Related

Front-Panel

Keys

Chapter 4 Command Reference

Introduction

∙When :TRIG:COUN:AUTO is ON and :CAL3:AVER[:STAT] is ON, the Counter clears the statistics results and the statistics current count on :INIT[:IMM].

∙If the instrument is already in the process of making a measurement or if INITiate:CONTinuous is set to ON, an :IMMediate command has no affect, and an error -213

(Init ignored) is generated.

∙When :CALC2:LIM:CLE:AUTO is ON, the Counter performs the following whenever the :INIT[:IMM] command is sent:

–invalidates the limit data,

–clears :CALC2:LIM:FAIL, :CALC2:LIM:FCOunt, and :CALC2:LIM:PCOunt information,

–turns off the front-panel display’s Limit annunciator, and

–sets the Limit-Detect output to the in-limit voltage level.

∙This command is an overlapped command (see IEEE 488.2, Section 12). Beginning a measurement or block of measurements with an :INITiate[:IMMediate] sets the Pending Operation Flag to true. Completing the measurement or block of measurements (normally or by aborting) sets Pending Operation Flag to false.

∙For an automatically armed Totalize measurement, use :ABORt to terminate the measurement initiated with :INIT[:IMM].

∙When [:SENS]:EVEN:LEV[:ABS]:AUTO is ON, the Counter performs an auto-trigger on the measurement channel(s) whenever the :INIT[:IMM] command is executed.

Stop/Single

Programming Guide 4-47