HP 132A, 53131A manual Scpi

Index

power on status bit, 3-24, 3-26	recall, 4-136
power-on, 3-23, 3-26, 3-30	reference oscillator
preset, 4-110	calibration, 4-34
print, 4-43	reference, oscillator, 4-92
prior firmware revisions	Related Documentation, 1-10
3317, 3335, and 3402, 2-32	remote, 3-6
3317, 3335,and 3402, 4-81	reset, 4-137
program messages	response message syntax, 3-16
definition, 3-14	response messages, 3-16
syntax, 3-14	data types, 3-17
program the Counter for math/limit	results
operations, 3-49	display, 4-38
program the Counter for status reporting, 3-	math, 4-7
38	query, 4-7, 4-14, 4-19
program the Counter to define macros, 3-52	raw, 4-38
program the Counter to display results, 3-43	statistics, 4-19
Program the Counter to Synchronize	revision
Measurements, 3-46	current firmware, 2-32, 4-81
programming examples, 3-58	firmware, 1-3, 2-31, 2-34, 4-130
programming for	prior firmware (3317, 3335, and 3402),
display results, 3-43	2-32
macros, 3-52	revisions
math/limit operations, 3-49	prior (3317,3335, and 3402), 4-81
status reporting, 3-38	rise time, 4-71, 4-89, 4-96
synchronizing measurements, 3-46	RQS/MSS, 3-22, 3-23
Programming Guide Contents, 1-9	RS-232, 4-43
programs	RS-232 connector, 4-114
examples, 3-59	RST, 4-137
writing SCPI (reference flowchart), 3-55	affected setup, 2-40
pulse width, 4-96	unaffected setup, 2-40, 2-43
Q	RST Response, 2-40
	RST summary list, 2-40
QSB, 3-22	S
query, 3-12, 3-16
query error, 5-6	S, 3-12
query parameters	save, 4-138
<numeric value>, 3-12	scale, 4-7
MAXimum, 3-12	scale/offset, 4-7
MINimum, 3-12	SCPI
questionable data/signal status register	command format, 3-7
group, 3-27, 3-32, 4-110	conformance, 2-20
queue	obtaining copy of standard, 1-10
error, 5-2	query format, 3-7
key, 4-117	version, 1-2, 2-20, 4-118
output, 4-133	SCPI Command Summary Table, 2-25
QuickBASIC, using, 3-59	SCPI programs, how to write, 3-55
QYE, 3-24	SDCL, 4-31
R	security code, 4-28
	security state, 4-28
radix, 3-17	selected device clear, 4-31
ratio, 4-89	self-calibration, 4-26
ratio, frequency, 4-65	self-test, internal, 4-142
reading an error, 5-2	sensitivity, 4-81
REAL, 4-41	separate/common, 4-81

Index- 4 Programming Guide