Chapter 4 Command Reference

Introduction

:STATus:QUEStionable:CONDition?

Query Response

Comments

Queries the status of the Questionable Data Condition Status Register.

Bits are not cleared when read.

∙Numeric data transferred as ASCII bytes in <NR1> format.

∙Range is 0 to 65,535.

∙The query response value is an integer formed by the binary-weighting of the bits. The value of unused bits is zero.

The Questionable Data Condition Status Register is cleared at power-on.

:STATus:QUEStionable:ENABle <non-decimal numeric> <NRf>

Range

Query Response

Comments

Sets or queries the Questionable Data Event Status Enable Register.

The parameter and query response value, when rounded to an integer value and expressed in base 2 (binary), represents the bit values of the Questionable Data Event Status Enable Register. The value of unused bits is zero when queried and ignored when set.

This register is used to enable a single or inclusive OR group of Questionable Data Event Status Register events to be summarized in the Status Byte Register (bit 3).

The range of the <non-decimal numeric> or <NRf> parameter is 0 to 65,535.

Numeric data transferred as ASCII bytes in <NR1> format.

∙At power-on and :STAT:PRES, the Questionable Data Event Status Enable Register is cleared (value is 0).

∙This value is unaffected by *RST and save/recall.

Programming Guide

4-111