HP 132A, 53131A manual EMC NRf Enable Macro Command, Enable Macro Query, Emc?

Chapter 4 Command Reference

*EMC <NRf>

(Enable Macro Command)

*EMC <NRf>

(Enable Macro Command)

*EMC?

(Enable Macro Query)

*EMC <NRf>

*EMC?

Sets or queries the Enable for defined macros.

Macro definitions are not affected by this command. One use of this command is to turn off macro expansion in order to execute an instrument-specific command with the same name as a macro.

The value of the numeric parameter determines whether the defined macros are enabled or disabled. A value that rounds to an integer value of zero disables any defined macros. A value that rounds to an integer value not equal to zero enables any defined macros.

<NRf> Range

<NRf> Resolution

Query Response

-32767 to +32767

1

∙Single ASCII-encoded byte, 0 or 1.

∙A value of zero indicates that macros are disabled and a value of one indicates that macros are enabled.

Comments ∙ *RST: 0 (disabled)

∙This value is unaffected by save/recall.

∙Macros are disabled at power-on.

4-126 Programming Guide