HP 132A, 53131A manual Chapter Summary, Introduction

Chapter 2 Command Summary

Introduction

Introduction

This chapter is a quick reference that summarizes the Counter ’s programming commands.

Chapter Summary

∙ Front Panel to SCPI Command Maps 1	pg. 2-3
– Some SCPI Syntax Conventions	pg. 2-3
– Input Channels Conditioning Keys to SCPI
Command Map	pg. 2-4
– Instrument Control, Utility, Recall, and
Save & Print Keys to SCPI Command Map	pg. 2-6
– MEASURE Keys to SCPI Command Map	pg. 2-8
– Gate & ExtArm Key to SCPI Command Map	pg. 2-10
– Gate & ExtArm Key to SCPI Command Map
For HP 53131A (and HP 53132A With
S/N Prefix Below 3646) Time Interval
Arming Commands	pg. 2-13
– Gate & ExtArm Key to SCPI Command Map
For HP 53132A (With S/N Prefix 3646
and Above) Time Interval Arming Commands	pg. 2-14
– LIMITS and MATH Keys to SCPI Command
Map	pg. 2-16
– Calibration Menu to SCPI Command Map	pg. 2-18
∙ HP 53131A/132A Command Summary 2	pg. 2-20
– SCPI Conformance Information	pg. 2-20
– IEEE 488.2 Common Commands	pg. 2-21
– HP 53131A/132A SCPI Subsystem Commands	pg. 2-24
∙ *RST Response3	pg. 2-40

_______________________________

1The section titled “Front Panel to SCPI Command Maps,”provides maps that show the front-panel keys and their corresponding (or related) SCPI commands.

2The section titled “HP 53131A/132A Command Summary,”lists the IEEE 488.2 Common and the SCPI Subsystem commands in tables 2-1 and 2-2, respectively.

3The section titled *RST Response, lists the states of all of the commands that are affected by the *RST command in Table 2-3. This section also lists commands that are unaffected by *RST in

Table 2-4.

2-2 Programming Guide