Microtek MKT-1300a manual Loading the Batteries

Loading the Batteries

Use two AA-sized Alkaline batteries (supplied), or two AA-sized Nickel Metal Hydride (NiMH) batteries as the power source for the camera.

1.Make sure that the camera is turned off; then push the battery cover in the direction of the arrow to open the cover.

2.Insert two AA-sized batteries into the compartment.

Ensure that the plus (+) and minus (–) polarity of the batteries matches the polarity markings in the battery compartment.

3.Hold the batteries in place and close the battery cover securely.

To remove the batteries, open the battery cover and take the batteries out.

NOTE:

•Do not mix old batteries with new ones.

•Do not mix different types of batteries or batteries from different manufacturers.

•Remove batteries and store them when not using the camera to prevent the batteries from leaking and damaging the camera.

See the Appendix “Using the Batteries” for details concerning the use of batteries to power the camera.

￿￿