Microtek MKT-1300a manual Beep Adjustment, Setting the Date, Setting the Time

Beep Adjustment

BEEP determines whether a “beep” signal is heard when you successfully perform an operation with the camera.

1.Enter Setup menu mode.

2.Use the 4-way arrow buttons to select “BEEP”.

3.Use the / arrow buttons to toggle between “ON” and “OFF”.

Select “ON” to enable the beep signal. Select “OFF” to disable the beep.

4.Press the MENU button to confirm the setting and exit the Setup menu.

Setting the Date

DATE enables you to change the calendar setting in your camera.

1.Enter Setup menu mode.

2.Use the 4-way arrow buttons to select “DATE”.

3.Use the / arrow buttons to toggle between the “yyyy”, “mm”, and “dd” settings.

4.Use the / arrow buttons to change setting.

5.Press the Shutter (OK) button once you have finalized the date settings.

6.Press the MENU button to confirm the settings and exit the Setup menu.

Setting the Time

TIME enables you to change the time setting in your camera.

1.Enter Setup menu mode.

2.Use the 4-way arrow buttons to select “TIME”.

3.Use the / arrow buttons to toggle between the “hr”, “mm”, and “sec” settings.

4.Use the / arrow buttons to change setting.

5.Press the Shutter (OK) button once you have finalized the time settings.

6.Press the MENU button to confirm the settings and exit the Setup menu.

"