Microtek MKT-1300a manual Appendix a PC/Web Cam, Usb

Appendix A -

PC/Web Cam

A PC/Web Cam is a digital camera attached to a computer that sends images or live video streams to a Web page and is ideal for video conferencing.

To use the Take-it S1/D1 as a PC/ Web Cam, you need a computer, the appropriate software, and an Internet connection.

To set up the camera for use as a PC/Web Cam, follow the steps outlined below.

1. Install the “Camera Driver”.

a)Turn on your computer, and insert the supplied Microtek CD- ROM into the CD-ROM drive.

NOTE:

For Windows 98/98SE users: If the camera driver has been installed for viewing images on the computer, it’s not required to reinstall camera driver.

b)When Microtek Software Installer screen comes up, click “Camera Driver”, then follow the on-screen instructions to install.

c)Click “EXIT” on the Microtek Software Installer screen when the driver has been installed.

d)Restart your computer.

2.Set the Mode switch to (Photo).

3.Connect the camera to your computer, using the provided USB cable.

•Connect one

end of the USB cable to the camera’s

USB connector.

•	Connect the
	other end of
	the USB
	cable to the
	USB
	connector of
	your computer.

4.Position your camera to display to the person with whom you will be teleconferencing what you want them to see.

5.Launch your Web camera software (e.g. Microsoft Net Meeting) and start the video conferencing function. If the software permits video recording, you can save recorded video in a file for later use.

6.When the teleconference is complete, disconnect your camera from the computer.

#￿