Microtek MKT-1300a manual

The camera does not take photos.

The subject is not in the LCD screen.

Digital Zoom doesn't function.

The date and time stamp on the image is incorrect.

The camera cannot delete images or movie/audio clips.

A1: The Mode switch is set to the incorrect mode.

•Set the Mode switch to (Photo) or / (Movie/Audio) mode.

A2: The flash has not finished charging.

•Wait until the flash is fully charged. When the flash charger LED stops blinking and steadily illuminates in green, the flash is fully charged.

A3: There is no available memory left on the SD card.

•Download files to your computer, and remove existing files from the SD card. You should then have more available memory space.

•Replace with a new SD card. (See page 13.)

A4: The SD card is write-protected.

•Set the write-protected tab on the SD-card to the unlocked position. A5: The SD card is corrupted or not formatted correctly.

•Reformat the SD card. (See page 16.)

•The card may be damaged. Contact your dealer.

A1: The Mode switch is set to the incorrect mode.

•Set the Mode switch to (Photo) or / (Movie/Audio) mode.

A2: The LCD screen is off.

•Press the DISP button to turn it on. (See page 17).

A:Digital Zoom is disabled when shooting movies.

A:The date and time are set incorrectly.

•Enter the Setup menu mode, then set the correct date and time (see page 15).

A:The SD card is write-protected.

• Set the write-protected tab on the SD-card to the unlocked position.

#$