Microtek MKT-1300a manual

For Macintosh:

System cannot find the newly created icon (Take-it or Take-it.SD) on the desktop.

The camera does not operate in PC/ Web Cam mode.

A2: The camera is not connected to the computer.

•Make sure one end of the USB cable is connected to your computer and the other end to your camera’s USB connector.

•Check if “Camera Driver” has been installed on your computer.

Go to the Windows Control Panel and double-click on Add/Remove Programs. If camera driver does not appear in the list, you must install camera driver from the Microtek CD-ROM.

•Check if the camera is detected by your system.

a)Right-click the “My Computer” icon and click Properties. The “System Properties” window appears.

b)Click the Hardware tab and then click the Device Manager button. Expand the “Imaging Device” tree. You should see the camera in the list.

A1: The Mode switch is set to the incorrect mode.

• Set the Mode switch to (Playback).

A2: The camera is not connected to the computer.

•Make sure one end of the USB cable is connected to your computer and the other end to your camera’s USB connector. (See page 48.)

A1: The Mode switch is set to the incorrect mode.

• Set the Mode switch to (Photo).

A2: The camera is not connected to the computer.

•Make sure one end of the USB cable is connected to your computer and the other end to your camera’s USB connector.

•Check if “Camera Driver” has been installed on your computer.

$￿