Miele H 344-2 B Stainless steel fronted appliances, Stainless steel surfaces, Cleaning and care

Cleaning and care

Stainless steel fronted appliances

The appliance front and controls are susceptible to scratches and abrasion.

Please observe the cleaning instructions for

–stainless steel surfaces,

–stainless steel coloured controls

Stainless steel surfaces

Stainless steel surfaces can be cleaned using a proprietary non-abrasive cleaning agent designed specifically for use on stainless steel, or with the Miele E-Cloth.

Avoid:

–cleaning agents containing soda, acids or chlorides,

–abrasive cleaning agents, e.g. powder cleaners and cream cleaners,

–abrasive sponges, e.g. pot scourers or sponges which have been previously used with abrasive cleaning agents.

To help prevent re-soiling, a proprietary conditioning agent for stainless steel can also be used.

Apply sparingly with an even pressure following the direction of the "grain".

Stainless steel coloured controls

The controls may suffer discolouration or damage if soiling is left on them for too long.

Remove any soiling straight away.

Avoid:

–cleaning agents containing soda, acids or chlorides,

–abrasive cleaning agents, e.g. powder cleaners and cream cleaners,

–abrasive sponges, e.g. pot scourers or sponges which have been previously used with abrasive cleaning agents,

–stainless steel cleaners,

–oven sprays.

If you are unsure about a particular product or need further advice please contact your nearest Miele Sales office. See back page for address.

Accessories

Do not leave accessories in the oven when they are not in use.

Racks and side supports

The stainless steel surfaces of these have been treated with PerfectClean enamel.

They should be cleaned in the same way as other surfaces coated with PerfectClean. See "PerfectClean".

Roasting filter

Clean in a solution of hot water and a little washing up liquid or in the dishwasher.

Note: some dishwasher detergents may cause the surface of the metal filter to discolour. This discolouration will not affect the functioning of the filter in any way.

52