2-12. Hub Assembly Installation
2
3
4
5
6
7
1
Tools Needed:
9/16 in
1Spool Support
2Hub Support Shaft
3Retaining Ring
4Hub Assembly
5Brake Washer
6Fiber Washer
7Hex Nut
Install hub assembly as shown. Tighten hex nut until a slight drag is felt while turning hub.
2-13. Installing Spool-Type Wire And Adjusting Hub Tension
1
2
3
4
5
1Retaining Ring
2Wire Spool
3Hole In Spool
4Hub
Remove retaining ring and slide spool onto hub. Turn spool until hub pin fits hole in spool. Reinstall re- taining ring.
5 Tension Adjustment Nut
Grasp spool in one hand and turn while using a wrench to adjust hex nut. When a slight force is needed to turn spool, tension is set.
Tools Needed:
9/16 in
