3-5. Burnback Control
|
| Burnback circuitry keeps welding | |
|
| wire from sticking to workpiece | |
|
| after arc is extinguished. This | |
|
| circuitry keeps weld output on | |
|
| welding wire from 0 to 0.25 seconds | |
|
| after wire has stopped feeding. This | |
|
| delay action permits welding wire to | |
2 | 1 | burn back to a point where it neither | |
sticks to workpiece or contact tip. | |||
|
| To adjust burnback time, open front | |
|
| access door. | |
|
| 1 | Interface Board PC3 |
|
| 2 | Potentiometer R37 |
|
| Rotate R37 clockwise to increase | |
|
| burnback time. | |
Close and secure front access door.
Tools Needed:
Ref.
