.A complete Parts List is available at www.MillerWelds.com
4-6. Connecting Spoolmatic) 15A Or 30A Gun
2
3
1
5
3
4
Tools Needed:
3/4, 5/8 in
1 Gun Trigger Plug
Insert plug into receptacle, and tighten threaded collar.
2Weld Cable
3Shielding Gas Hose
Route weld cable through opening in front panel.
Route gas hose along side panel.
4 Positive Weld Output Terminal
Connect weld cable to weld output terminal.
5 Regulator/Flowmeter
Route shielding gas hose up to regulator/flowmeter. Connect gas hose to fitting on regulator/flowme- ter.
.Two welding guns may be connected to the welding power source at the same time, but only one welding gun may be in use at any one time. If the triggers of both welding guns are pulled at the same time, the weld output and wirefeed motor are disabled.
804
