Miller Electric OM-230 Connecting XR Aluma-Pro, XR Edge, XR-A Gun, Or XR-A Python, 32 in 2.4 mm

.A complete Parts List is available at www.MillerWelds.com

4-7. Connecting XR Aluma-Pro, XR Edge, XR-A Gun, Or XR-A Python

3/32 in (2.4 mm)

2 3

.XR Edge guns prior to serial no. LE079101 require an adapter cord (part no. 195 498).

1Gun End

2Gun Liner

3Wire Outlet Guide

Trim excess liner from end of gun so no more than 3/32 in (2.4 mm) of liner extends past wire outlet guide.

4 Gun Securing Knob

Loosen securing knob. Insert gun end through opening until it bottoms against drive assembly (make sure gun end does not touch drive rolls). Tighten knob.

Be sure to change drive rolls to the

4proper size and type.

5 Gun Trigger Plug

Insert plug into receptacle, and tighten threaded collar.

. If Aluma-Pro push/pull gun has a listed SUP value, set the power source to match the SUP value (see Section 5-5).

. Be sure to trim liner to proper extension.

1

5

Ref. 804 910-A / 804 936-A

OM-230 693 Page 15