.A complete Parts List is available at www.MillerWelds.com
4-10. Installing Wire Spool And Adjusting Hub Tension
Use compression spring | When a slight force is needed | ||
with 8 in (200 mm) spools. | to turn spool, tension is set. | ||
|
|
|
|
|
|
|
|
Installing 1 Or 2 lb Wire Spool
Spindle
Install these
Spindlecomponents onto spindle.
Order extra spring
Part No. 186 437
Remove these components from spindle.
Tools Needed:
15/16 in
To install either a 1 lb or 2 lb wire spool, follow the procedure as shown in the illustration.
4-11. Positioning Jumper Links
Tools Needed:
Check input voltage available at site.
3
200 230
3/8 in
230 460 575
1 Jumper Links Access Door
Open door.
2 Jumper Link Label
Check label − only one is on unit.
3 Input Voltage Jumper Links
Move jumper links to match input voltage.
153 | 144 |
|
Close and secure access door.
2
1
153
