Miller Electric OM-230 manual Drive Roll And Wire Guide Kits, 087, Grooved 056, 0.9 mm 204, 079

SECTION 9 − PARTS LIST

9-1. Drive Roll And Wire Guide Kits

.Base selection of drive rolls upon the following recommended usages:

1V-Grooved rolls for hard wire.

2U-Grooved rolls for soft and soft shelled cored wires.

3U-Cogged rolls for extremely soft shelled wires (usually hard surfacing types).

4V-Knurled rolls for hard shelled cored wires.

5Drive roll types may be mixed to suit particular requirements (example: V-Knurled roll in combination with U-Grooved).

	Wire Diameter			Kit No.	Drive Roll		Inlet
Fraction		Decimal	Metric		Part No.	Type	Wire Guide
.023/.025 in.		.023/.025 in.	0.6 mm	087 131	087 130	V-Grooved	056 192
.030/.035 in.		.030/.035 in.	0.8/0.9 mm	204 579	203 526	V-Grooved	056 192
.030 in.		.030 in.	0.8 mm	079 594	053 695	V-Grooved	056 192
.035 in.		.035 in.	0.9 mm	079 595	053 700	V-Grooved	056 192
.045 in.		.045 in.	1.2 mm	079 596	053 697	V-Grooved	056 193

Ref. S-0026-B/7-91

OM-230 693 Page 46