Miller Electric OM-230 manual Operation, Controls

.A complete Parts List is available at www.MillerWelds.com

SECTION 5 − OPERATION

5-1. Controls

1 Voltage Control

Turn control clockwise to increase voltage.

2 Wire Speed Control

Turn control clockwise to increase wire feed speed.

3 Voltmeter

4 Wire Feed Speed Meter

3 4

1 2

.This unit has three automatic timers included in its operation to help save contact tips, gas, and wire:

Tip Saver − Weld output shuts off if tip is shorted to work surface.

Safety shut-off − Weld output will shut off if no arc is detected within 3 seconds after gun trigger is depressed.

Jog mode − When loading a new roll of wire or if the gun trigger is accidentally pressed, gas will shut off after 1 minute and wire will shut off after 2 minutes saving wire and gas.

226 647-B

OM-230 693 Page 24