6-6. Program Push Button
1
2
Program
3
1 Program Display
The number of the active program is displayed.
2 Program Push Button
Press button to activate program select feature. To change the pro- gram number, press the Program push button and rotate the Adjust control.
3 Program Push Button LED
The LED lights to indicate the Pro- gram push button is active.
6-7. Upper Display
1
4
V/Trim 
Time (sec)
5
3
2
1 Upper Display
The upper display shows voltage/trim or time. The unit displays both preset and actual arc voltage. When the unit is in a welding state, ac- tual arc voltage is displayed. The upper dis- play shows welding sequence time when the Time LED is illuminated.
2 Upper Display Push Button
Press and hold button to adjust or display weld time. Release button to display voltage/trim.
3 Upper Display Push Button LED
The upper display push button LED illumi- nates to indicate that information displayed
can be changed by the Adjust control.
4Volts/Trim LED
5Time LED
The LEDs below the display illuminate to indi- cate which value is being shown.
At any time while welding, the unit permits the adjustment of the weld sequence voltage/trim while continuing to display actual arc voltage.
•If the unit is displaying a welding sequence that can be timed, the welding time display mode is entered by pressing the upper dis- play push button repeatedly until welding
time is the active parameter in the upper dis- play. At idle, the upper display toggles be- tween showing weld voltage/trim or weld time, with subsequent presses of the upper display push button.
•The unit defaults to displaying welding volt- age/trim when a welding sequence display mode is first entered.
•If the weld sequence has a time set (as in spot time) and the trigger is held, after the weld program is completed, ERR TRG 1 will be displayed to indicate the weld program is complete. Release trigger to clear error.
