Mitel NuPoint Messenger Technical Documentation - Release 7.0
1. Configuring the access code that the outdial index represents in the Pager application
2. Establishing a minimum billed number length in the LCOS assigned to the originating mailbox
3. Setting these outdial billing parameters in the configuration of the originating mailbox:
– Internal outdial index
– Billed outdial index
– Unbilled outdial index
– Billing number
– Billing dialing order
Example
Building on the example mentioned earlier, suppose you want call placement outdials carried by
common carriers and billed to the mailbox owner’s common carrier calling card. You also want to
allow unbilled NuPoint Fax deliveries and unbilled paging calls. The mailbox owner’s billing
number is 103-444-9801. To do this, you:
1. Configure indexes and access codes such as
Index Access code (Dial String) Outdial type (Outdial System Name)
3 T+9+T+103330+G Call place/Sprint
4 T Internal
5 T9T Paging
2. Set the appropriate mailbox configuration parameters as shown in Figure 6-13.
Figure 6-13 Outdial Billing Configuration

The mailbox owner would dial a number such as:

The system dial number thus:

©Copyright 2002, Mitel Networks Corporation 106