Mitel 2700-1398-B1 Pager System Parameters , NP Receptionist Optional Feature

Mitel NuPoint Messenger Technical Documentation - Release 7.0
line triplets to report: *
line triplets to report:
Line 1:3:0 configuration:
...all parameters set to defaults
Line 1:3:1 configuration:
...all parameters set to defaults
Line 1:3:1 configuration:
...all parameters set to defaults
Line 1:4:0 configuration:
4 Pause compression enable no
Line 1:4:1 configuration:
4 Pause compression enable no
Line 2:1:0 configuration:
13 Enable AGC yes
4 Pause compression enable no
Line 2:1:1 configuration:
13 Enable AGC yes
4 Pause compression enable no
Keep entering triplets, then enter <CR> on a line by itself.
line triplets to report:
Pager System Parameters
To see the index number, name, access code, and hold time of each supported pager system,
you can obtain a Pager Systems Access Codes Report (see sample in Figure 12-34).
To see all parameters configured for supported pager systems, you should obtain a System
Configuration Report (see sample in Figure 12-26).
Figure 12-34 Sample Pager Systems Access Codes Report
PAGER SYSTEMS ACCESS CODES
Fri Apr 21 17:20:58 1995
INDEX PAGER NAME ACCESS CODE HOLD TIME
3 TEST DEMO t9t1 5
4 OUTSIDE LINE t9t 5
7 SKYPAGER t9t18005554244++++++++++ 5
8 800 PAGER t9t18005551616++++g++ 5
11 FaxInternal t 5
15 NP View Pager 2
NP Receptionist Optional Feature
When NP Receptionist is installed on your server, two reports are available that show NP
Receptionist configuration: the Receptionist Day/Night Treatment Types Report and Pre-
Extension Dial Strings Report.
©Copyright 2002, Mitel Networks Corporation 193