Mitel 5330 manual Cordless Module LED Indicators, Using a Cordless Device as a Remote Control

Mitel 5330 and 5340 IP Phones User Guide

6.The LED on the Bluetooth Module lights and remains lit for a few seconds and then resumes normal behavior. The Bluetooth device is paired to the Bluetooth Module.

7.Press OK to return to the Cordless Devices application.

8.Press Close to exit the application.

Unpairing an Accessory

To unpair a cordless accessory:

1.Press the blue Menu key and then press Cordless Devices.

2.Press the device name that you want to unpair. The information screen for the selected device appears.

3.Press Unpair this Device. If the accessory is in use, an error message is displayed. Otherwise, the accessory is unpaired, removed from the display, and can no longer be used to interact with the phone.

4.Press Close.

For more information about the Cordless Devices Application, see page 83.

Cordless Module LED Indicators

The Cordless Module has a blue light-emitting diode (LED) that indicates the current status of the module:

Blue LED	Function
Solid	Audio is active between the module and either the handset or headset.
Blinking	Pairing mode is active or a firmware upgrade is in progress.
Off	No audio is active.
Solid for several seconds	Pairing is successful.

Blinking: LED is On and Off for equal amount of time

Using a Cordless Device as a Remote Control

When not being used to talk, the buttons on a Mitel-branded cordless handset/headset can act as a remote control device to change volume and mute settings on the host IP phone. For example, in a remote hands-free conference setting, the chairman can use the volume and mute buttons on a cordless device to adjust speaker levels and mute the microphone on an IP phone that is not within his reach. HTML applications may also make use of the cordless device buttons, but functionality may differ among applications.

- 75 -