Mitel 5330 Handset Alerting Tones and LEDs, Feature, Function, LED Color, LED State, Indicates

Models: 5330

1 97
Download 97 pages 48.5 Kb
Page 87
Image 87
Handset Alerting Tones and LEDs

Mitel 5330 and 5340 IP Phones User Guide

Handset Alerting Tones and LEDs

The handset provides the following alerting tones:

Feature

Function

 

 

Mute key on cordless device

2-pitch tone occurs immediately. Reminder tone occurs 30

ON/OFF

seconds after activation and then regularly until deactivated.

 

 

Mute key on Phone ON/OFF

Immediate tone with Bluetooth; no immediate tone with DECT.

 

Reminder tone occurs 30 seconds after activation and then

 

regularly until deactivated.

 

 

Low battery (within 10 minutes left

3 beeps and 20 second pause repeated 3 times

for DECT and within 20 minutes left

 

for Bluetooth)

 

Low battery (within 2 minutes left)

3 rapid beeps and 1.5 second pause repeated 3 times

 

 

Out of range

DECT: Repetitive 3-pitch tone until you are back in range. Note:

 

If you are out of range for more than 10 seconds, any call that is

 

in progress is dropped and not recovered.

 

Bluetooth: Single 3-pitch tone to indicate that you are out of

 

range. Note: All Bluetooth devices will drop any call in progress if

 

the maximum range is exceeded.

 

 

Note: Audio indications are heard in the handset only when it is in use and may interrupt voice transmission.

The handset has two LEDs:

Blue – indicates the operational status of the handset

Green – indicates the status of the electrical charge of the battery

LED Color

LED State

Indicates

 

 

 

Blue

Solid

Handset is muted

 

 

 

 

Blinking

Handset is in pairing mode

 

 

 

 

Winking

Active audio path between Handset and Module

 

 

 

 

Off

No audio path between Handset and Module OR

 

 

Battery is dead

 

 

 

Green

Solid

Battery is fully charged

 

 

 

 

Blinking

Battery is charging. Note: It is normal for the handset LED to cycle

 

 

between blinking and solid as battery charge is maintained.

 

 

 

 

Off

When handset is cradled and the LED does not flash or illuminate, this

 

 

indicates an absence of battery power. During the first 30 – 60 minutes

 

 

that the light is off, the battery may be trickle charging. If that is the case,

 

 

the LED will resume normal behavior within that 60 minute period. If the

 

 

LED remains off for more than 60 minutes, then either the battery is no

 

 

longer chargeable or there is a problem in the charging circuit.

 

 

 

- 79 -

Page 87
Image 87
Mitel 5330 manual Handset Alerting Tones and LEDs, Feature, Function, LED Color, LED State, Indicates