5330/5340 IP Phones – User Guide
Mute the conference unit
To mute the conference unit so that conversation in the meeting room cannot be heard by individuals being conferenced:
•Press Mute.
USING THE LINE INTERFACE MODULE
Your phone supports the Mitel Line Interface Module. The Line Interface Module allows you to make and receive calls over an analog line (Line Interface Module line) connected to your phone. The Line Interface Module operates in either of the following two modes, as determined by your System Administrator:
•Line Interface Module Mode: your phone allows you to use the Line Interface Module line at any time
•Failover Mode: you can use the Line Interface Module line only when the IP connection has failed
Note: Handsfree and
For information on emergency number dialing using the Line Interface Module, refer to Emergency Calls.
Making and Answering Calls Using the Analog key
To make a call using the Analog line:
1.Lift the handset.
2.Press the key you programmed as Analog Line. ANALOG CALL is displayed.
3.Dial the number.
Note: When you make an external call over the analog line, a prefix dialing number is not required. If your phones Analog Line key has the Privacy option enabled, you cannot access the analog line when another phone is using the analog line (key is solid orange).To access the analog line, the user of the other phone must first hang up. To determine whether the Privacy option is enabled, contact your System Administrator.
To answer a Call using the analog line:
1.Lift the handset.
2.Press the Analog Line key that is highlighted.
64
