Registration by a 5760 VCA User, VCA Main Menu | Mitel 5700 manual

Chapter 2 Registering to the 5700 VFA

Verify Password When logging in to the 5700 VFA for the first time, you must type the password a second time.

Gatekeeper The IP address of the 5700 VFA. If you do not know it, ask your system administrator (when entering an IP address, do not enter leading zeroes).

NOTE If you want to log in to a non-5700 VFA gatekeeper, you must do this during the MeetingPoint startup.

In the Login dialog box, enter anything in the Password box, then enter the gatekeeper’s IP address (do not enter leading zeroes). Click Connect.

2.2Registration by a 5760 VCA User

To register the 5760 VCA with a 5700 VFA, you must enter its address in the Network Configuration. Consult with your system administrator.

!To log in to the 5700 VFA

1. Press <Menu>. The Main Menu opens. Select Network.

5760 VCA Main Menu

2.In the Set Network dialog box, navigate to the H.323 tab and press the right arrow button to access H.323 properties.

4	Mitel Networks 5700 VFA End Point’s Guide

Image 10

Mitel 5700 manual Registration by a 5760 VCA User, VCA Main Menu

Contents

End Points Guide Trademarks Limited Warranty Product Names Table of Contents Page Telephony Exchange in Videoconferences Page Registration by a MeetingPoint 4.6 or Higher User Initial Login to 5700 VFARegistering to the 5700 VFA To log in to the 5700 VFA Registration by a 5760 VCA User VCA Main Menu 323 Tab Registration by Other H.323 Videoconferencing User Calling Other Videoconferencing Users Videoconferencing in Non-Voice First ModeTo place a call using a 5020/5220 IP Phone Voice First Mode Videoconferencing with 5020/5220 IP Phones To call another registered user Call Forward Setting Call Forward in MeetingPointTo set Call Forward Call Forward Calls Properties Are engaged in another videoconference Select if you want to forward ALL calls intended forYou to another user Select if you want to forward calls intended for you to Destination directory number Forward if Busy 70* or other code number To disable Call ForwardEntering a Call Forwarding Dialing Code 71* or other code number Call Forward Mitel Networks 5700 VFA End Point’s Guide Call Pickup To pick up a call to a specific user Call Pickup in MeetingPointPick Up Specific Call Dialog Box To pick up any ringing call Incoming Call Call Pickup in Other H.323 Videoconferencing Applications To transfer a call to another user Call TransferCall Transfer in MeetingPoint Transfer Dialog Box Call Transfer in 5760 VCA Call Transfer in Other H.323 Videoconferencing Applications Call Transfer Mitel Networks 5700 VFA End Point’s Guide Inviting Additional Users from MeetingPoint AD-HOC ConferencingInviting Additional Users with 5020/5220 IP Phones Inviting Users from MeetingPoint Inviting Additional Users from 5760 VCA Inviting Users from 5760 VCA Ad-Hoc Conferencing Page Starting a Call Through a Gateway To start a LAN-to-ISDN call through a gatewayPage Connecting to AN MCU Videoconference To dial a videoconference through an MCU