Chapter 4 Call Forward
4.2Setting Call Forward in Other H.323 Videoconferencing Applications
In 5760 VCA and other H.323 videoconferencing applications, you can enable Call Forwarding by dialing a code. If you do not know the code, ask the system administrator.
!To set Call Forward
1.Open your application’s Dialing utility.
2.Dial one of the following (bold values are factory defaults):
For this feature | Dial this number |
Forward if No | *70 (or other code number) followed by [other |
Answer | destination directory number] |
| Activate if you want to forward calls intended for you to |
| another user. The interval before transferring the call is |
| set by the system adminstrator. |
| For example, *70751will forward calls to user 751. |
Forward if Busy | *71 (or other code number) followed by [other |
| destination directory number] |
| Activate if you want to forward calls to another user if |
| you are engaged in another videoconference. |
| For example, *71751will forward calls to user 751. |
Unconditional | *72 (or other code number) followed by [other |
forwarding | destination directory number] |
| Activate if you want to forward all calls intended for |
| you to another user. |
| For example, *72751will forward calls to user 751. |
NOTE After dialing, a “Call Rejected” message appears. However, the request is accepted by the 5700 VFA if the dialed number is valid.
12 | Mitel Networks 5700 VFA End Point’s Guide |
|
|
