Mitel 5700 manual Registration by Other H.323 Videoconferencing User

Chapter 2 Registering to the 5700 VFA

2.3Registration by Other H.323 Videoconferencing User

If the 5700 VFA is in Open mode for all H.323 users, it automatically permits third- party (non-Mitel Networks) users to register.

If the login attempt is unsuccessful, contact your system administrator. In this case, the administrator must grant you login permission manually.

!To log in to the 5700 VFA

1.In your videoconferencing application’s Gatekeeper setup, enter the IP Address of the 5700 VFA (ask your system administrator). When entering an IP address, do not enter leading zeroes.

2.Continue your application’s required procedure (such as exiting and restarting the application) for implementing setup changes.

3.If the first login attempt is unsuccessful, notify the system administrator, who will change the required login permission properties.

4.If your application requires, exit and log in again.

6 Mitel Networks 5700 VFA End Point’s Guide