Call Pickup | Mitel 5700 instruction

5CALL PICKUP

The Call Pickup function enables a user to answer a videoconferencing call intended for another user. To do this, the user must be given Pickup Permission for the destination by the system administrator.

The available types of call pickup are Specific and Non-specific.

!Specific - Picking up a call that’s intended for another specific user.

For example, if a videoconferencing call comes for an absent neighboring colleague, you can pick up that call.

!Any Ringing Call - Picking up a call that’s intended for the longest-ringing destination for which you have pickup permission.

For example, if you have pickup permissions for two neighboring colleagues, and both receive videoconferencing calls at the same time, you can pick up the call that started ringing first.

NOTE When the 5700 VFA is connected to a 3300 ICP (Voice First Mode), you do not need to program these settings (the 5700 VFA uses the Call Pickup settings of the 3300 ICP).

Mitel Networks 5700 VFA End Point’s Guide	15

Image 21

Mitel 5700 manual Call Pickup

Contents

End Points Guide Trademarks Limited Warranty Product Names Table of Contents Page Telephony Exchange in Videoconferences Page Registering to the 5700 VFA Initial Login to 5700 VFARegistration by a MeetingPoint 4.6 or Higher User To log in to the 5700 VFA VCA Main Menu Registration by a 5760 VCA User 323 Tab Registration by Other H.323 Videoconferencing User To place a call using a 5020/5220 IP Phone Voice First Mode Videoconferencing in Non-Voice First ModeCalling Other Videoconferencing Users Videoconferencing with 5020/5220 IP Phones To call another registered user Setting Call Forward in MeetingPoint Call ForwardTo set Call Forward Call Forward Calls Properties You to another user Select if you want to forward ALL calls intended forAre engaged in another videoconference Select if you want to forward calls intended for you to Forward if Busy Destination directory number Entering a Call Forwarding Dialing Code To disable Call Forward70* or other code number 71* or other code number Call Forward Mitel Networks 5700 VFA End Point’s Guide Call Pickup Call Pickup in MeetingPoint To pick up a call to a specific userPick Up Specific Call Dialog Box Incoming Call To pick up any ringing call Call Pickup in Other H.323 Videoconferencing Applications Call Transfer in MeetingPoint Call TransferTo transfer a call to another user Transfer Dialog Box Call Transfer in 5760 VCA Call Transfer in Other H.323 Videoconferencing Applications Call Transfer Mitel Networks 5700 VFA End Point’s Guide Inviting Additional Users with 5020/5220 IP Phones AD-HOC ConferencingInviting Additional Users from MeetingPoint Inviting Users from MeetingPoint Inviting Users from 5760 VCA Inviting Additional Users from 5760 VCA Ad-Hoc Conferencing Page To start a LAN-to-ISDN call through a gateway Starting a Call Through a GatewayPage To dial a videoconference through an MCU Connecting to AN MCU Videoconference